How to Make Your Trampoline Bouncier | Proven Tips

We all trampoline lovers want a super bouncy trampoline to hop in. But due to various circumstances, it can lose its magnitude. So let’s see how to make your Trampoline more active in those circumstances!

There are various ways you can make your Trampoline bouncier. You don’t have to call in the manufacturer or a costly technician for that. Instead, we will tell you how to optimize your trampoline mat to get the best bounce. Let’s get to it.

Why is my Trampoline not bouncy?

Do trampolines get bouncier over time? The short answer is no. So, now the question is, why does a trampoline lose its bounciness? The answer is complicated. It happens for a variety of causes. The most crucial are:


Rusty springs are a common sight in the area.

If we leave the springs exposed due to a lack of care, rust can occur. Rust will have a high propensity towards reviving and rebounding. You may glue the springs together to prevent them from bouncing as much as you wish.

Loose Elasticity

This is undoubtedly one of the most common causes of trampoline rebound loss. It’s only regular for the springs to lose their flexibility after jumping on the same trampolines year after year. They’ll stretch and operate like a tight-fitting pair of pants that won’t cause you to bounce.

shattered springs

Constant jumping or a considerable object falling might cause springs to fail. Spring power will be greatly reduced if they are cracked or fractured.

A Soiled Jumping Mat

The surrounding area will not provide the jumper with a solid bounce if a hole is developed or worn in the jumping mat.

Exceed the weight limit

The structural load capacity of each Trampoline varies. If you go above the limit, there’s a severe risk it’ll shatter or at least impair the Trampoline’s general durability, as well as bounce back.

What to think about before adding additional bounce to your Trampoline

It’s a lot of fun to be able to bounce on a trampoline. In the sky, watching people and the grass below may be a lot of pleasure. The rush of completing a backflip and landing is a sensation that cannot be replicated anyplace else. So it’s even more enticing to bounce your Trampoline for it to climb higher in the air.

But before doing that, there are a few things to consider

Do you have an Enclosure net (Safety Net)?

The more bounce you have, the more likely you will lose control of where you land.

It also implies he may be on the ground rather than on the Trampoline.

As a result, a safety net for your stepping stone becomes much more critical.

You want to safeguard yourself and others on the Trampoline, especially if you want to bounce your Trampoline.

If you have a safety net, double-check that it is secure and that all nuts and screws are in place. Find a safety net if you don’t already have one. When it comes to people jumping off a trampoline, it is always preferable to be safe than sorry. It may be the hospital cost if someone gets harmed while jumping on your bouncing Trampoline and you are unsure. As a result, provide yourself with a safety net.

Do you owe a sleeve for spring?

If you want to bounce your Trampoline, you’ll need a spring cover, just like you’ll need a safety net. The spring cover keeps the springs safe if someone falls on them by mistake. If someone lands on naked springs, the springs will either shatter, or the person landing on them will be gravely wounded.

If you want to jump on your Trampoline, make sure it has a spring cover so no one is wounded and the Trampoline stays intact.

How to make a trampoline more bouncy?

There are a few kinds of stuff that need to be cached when you want to increase the bounce of your Trampoline. Most people like to jump on a highly bouncy trampoline because they feel free and weightless.

The trampolines you bought a few days ago will take a long time to become inflatable. But, with a few tips and tweaks, you can get it to bounce right off the bat. Let me tell you all about it in detail.

  • Add more springs
  • Replace existing springs for new quality springs
  • Rearrange trampoline springs on top of each other
  • Using anchor kits to add extra springs
  1. Add more springs

Trampolines bounce because of the springs attached to them. The springs act like rubber bands which help increase rebound. When you hop on your Trampoline, the springs stretch, store your kinetic energy, and then that kinetic energy will be used to kick you back into the air. To make the Trampoline more bouncy, you can add more springs.

  1. Replace the old springs with new ones

Replacing the springs is also an essential step in bouncing your Trampoline. If your Trampoline has been exposed to harsh weather conditions, the springs may rust. This decreases the rebound of the Trampoline as the springs cannot be stretched too far. You must put effort into checking the condition of your springs. Check the loss of elasticity of the spring.

This happens when you or your child have used the Trampoline for a long time without letting it stand. Look for broken or cracked springs. While many ropes are on a trampoline, even a single broken spring can reduce kickback and present safety hazards. Rust causes the spring to lose elasticity.

Under these conditions, replacing the springs with new ones is necessary. This will help bring back the lost bounce on your Trampoline.

  1. Rearrange the springs on top of each other

Pattern X: Crossing the Trampoline springs can also help increase the rebound considerably. The significant part of this approach is that you don’t have to buy extra springs for it. Now, All you need to do is lay out each spring in pairs to overlap and form an X.

V-Pattern: You can also try the V-pattern for attaching the springs. It would be best if you left the springs connected with their respective grooves in the sample frame to do this. However, you must use alternate rungs to attach the springs to the jumping mat.

This means that each alternating rung of the jumping mat will have two springs connected and create a V shape.

Pattern W: You can also opt for pattern W. Every third alternate rung of the jumping mat will have three stations connected. The rest of the rungs should have two springs attached. If done correctly, it is a W shape.

This arrangement of springs increases the rebound of your Trampoline.

  1. Using anchor kits to add additional springs

You can purchase the anchor kits that will allow you to add the extra springs around your Trampoline. Your Trampoline typically comes with 84 springs, but if you wish, you can increase the number of springs to bounce the Trampoline.

Few Great ways to make an inflatable trampoline

Now we’ll concentrate on the most essential part of the article. So, let’s see how the Trampoline may help you boost your leaping power.

1st Method: Routine maintenance

This is the simplest way to determine whether or not your Trampoline is in good operating order. A routine inspection will reveal any degradation or damaged parts. Wear or holes in the jumping mat or net, corrosion or rust on metal parts or springs, broken springs, deterioration of seat cushions, and other items should all be checked during this examination.

Replace any damaged springs with new ones if necessary. Use a rust prevention treatment like lemon solution or a widely available rust remover on rusted springs. In addition, the repair kit should be used to patch any holes in the mat. All of this will extend the Trampoline’s overall life and its bouncing ability.

2nd Method: Adding more springs

Adding extra springs to the Trampoline is the second approach to increase its bounce. It would thus be beneficial if you purchased high-quality springs. The quantity of springs you’ll need is determined by how far you wish to expand your springboard.

Suppose you place double or triple springs on a stair, for example. This will surely boost trampoline jumping power, but it may shorten the spring’s lifespan.

Spring-added trampolines are not available on all trampolines.

3rd Method: Replacing existing springs

Although solid springs are more expensive than standard springs, you will still benefit in the long run if you are wondering how to bounce your Trampoline without going through the springs. This is an excellent undoubtedly a good thing that you can apply without hesitation.

Trampolines will give you a big bounce with quality springs if you can spend a little.

As previously said, rusted springs do not give adequate stretch. Thus you will not receive the desired jump. Furthermore, when the same springs are utilized year after year, their elasticity degrades. As a result, they should be changed to improve rebound.

Mark any springs that are corrupted, broken, or strained. Then swap them out for new ones. You may immediately restore the large or tiny Trampoline’s bouncing capability by doing so.

4th Method: Install more powerful springs

As you can see, even after replacing the old springs, there is still insufficient rebound. So why don’t you put the heavy-duty springs to the test? The general rule is that the more influential the springs are, the more energy they can store and exert. As a result, the outcome will have a more dramatic bounce.

Strong springs are more expensive than standard springs, but you will save money long-term. So if you’re looking for a technique to make your Trampoline more bouncy without crossing the springs, this is a terrific solution that you can use right now.

If you’re willing to put in a little effort, the trampolines will provide you with tremendous bounce and quality springs.

5th Method: springs that cross

It’s a quick and effective technique to bounce a trampoline. However, make sure the fountains are in good working order before crossing the source. So, with a trampoline, how do you travel the springs?

You may achieve this in a variety of ways, including:

  • (5.1): Pattern of the cross (X)

It is more accessible than other methods of crossbreeding. Surprisingly, this approach does not require any more springs. Place two successive springs in the setting in a cross pattern once they’ve been removed (X). Also, finish the way for all of the spring assortments.

  • (5.2) V-shaped Pattern

Like the Model X, this approach does not need the purchase of springs. Remove three springs in a row to proceed using this spring attachment. Now, insert one end of any two springs into the same slot in the frame’s central spring. Then, using V-hooks, connect the opposite ends of the two springs to the first and third placemats, respectively. As a result, there will be no spring in the mat’s second slot.

Then repeat the procedure using the same diagram. There will be a free space in the frame and the V-hooks one after the other if you install the two new springs with the V-hook of the first and third spring of the final step.

  • (5.3) W Shaped Pattern

The V-pattern has been updated in this edition. To complete the W-pattern, you’ll need to buy more springs. It consists of V-pattern and linear patterns. Straightforwardly use a V-pattern. As a result, there will be three springs on each of the three rungs.

The W pattern is challenging to master, yet it is one of the most effective trampoline jumps. If you execute it correctly, an additional spring will be added to the top of W.

6th Method: Trampoline with two springs

Another practical approach to make the Trampoline more bouncy is to do this. Add a double layer spring to the entire spring array, or at least many spots on the Trampoline. You may also use the linear or cross methods to add the spring. Again, your enormous Trampoline will bounce with such a great attachment.


Like any other thing you buy, trampolines eventually wear out. Regularly maintain your Trampoline by checking the screws and replacing any old and rusty springs. To get more bounce, consider adding more springs, crisscross your springs, or purchase a spring kit that allows you to put more springs on Your Trampoline.

Leave a Comment